AI Generator 4012 Series perkins generator specifications
4012-46TAG3A WIth Radiator
General Features:
All qualified generator sets are subjected to a comprehensive
performance test which includes 50% load, 70% load, 100% load, 110%
load and to check, verify that all control systems, alarm and
shut-down protection.
Equipped with battery charger and 24V high performance
maintenance-free lead-acid starting batteries and connecting
cables.
Stainless galvanized zinc plates with strong corrosion-proof.
Vibration isolators between the engine/alternator and base frame.
Equipped with industrial silencer and flexible exhaust hose.
Designed to comply with ISO8528/GB2820.
Powered by Perkins engine and coupled with Stamford alternator.
Water jacket preheater, oil heater and double air cleaner, etc. are
available.
Phase Rating, 50Hz, PF 0,8
| Generator set model | Voltage | Hz | Phase | P.F. | Prime Power | Standby Power |
| (V) | | | | KVA | KW | KVA | KW |
| AP1880 | 230/400 | 50 | 3 | 0.8 | 1688 | 1350 | 1857 | 1485 |
Diesel Engine Specifications
Powered by UK engine 1688kva super silent diesel generator price
with 4012-46TAG3A
| Engine manufacture | Perkins Engines Company Limited |
| Engine brand | Perkins |
| Engine model | 4012-46TAG3A |
| Engine speed (rpm) | 1500 |
| Baseload power | Prime power | Standby power |
| Gross engine power (kWb) | 1260 | 1500 | 1643 |
| Typical Genset electrical output 0.8pf 25ºC (100 kPa) (KW) | 1136 | 1364 | 1500 |
| Cylinders | 12-cylinder, 60° Vee |
| Cycle | 4 stroke |
| Induction system | Turbocharged |
| Combustion system | Direct injection |
| Compression ratio | 13:01 |
| Bore * Stroke (mm) | 160 * 190 |
| Cubic capacity (Litre) | 45.842 |
| Injection system | Direct |
| Governor type | electronic |
| Fuel Consumption (litre/hour) | |
| Standby | 405 |
| Prime | 370 |
| Baseload | 310 |
| 75% output power | 275 |
| 50% output power | 210 |
Alternator Specifications
| Alternator manufacturer | Leroy-somer Electro-technique (Fuzhou) Company Ltd. |
| Alternator brand | Leroysomer |
| Alternator model | LSA52.3S5 |
| Control system | AREP |
| A.V.R. | Included |
| Voltage regulation | ±1.0% |
| Insulation system | Class H |
| Protection | IP23 |
| Rated power factor | 0.8 |
| Winding pitch | Two thirds |
| Winding leads | 6 |
| Frequency (Hz) | 50 |
| Voltage (V) | 400 |
| Phase | 3 |
| Output ratings (kVA/kW) | |
| ----------------Cont.H-40°C | 1860/1488 |
| ----------------Standby-27°C | 2050/1640 |
| THF | <2% |
| TIF | <50 |
| Max. overspeed (Rev/Min) | 2250 |
| Bearing | Single |
Perkins Prime Generator 1350KW/1688KVA 4016TAG1A Photos
Rating conditions: 25°C air inlet temperature, barometric pressure
100 kPa, relative humidity 30%. Please consult your distributor or
the factory
for ratings in other ambient conditions. Note: For full ratings
please refer to Perkins Engines Company Limited. All electrical
ratings are based on an
average alternator efficiency and a power factor of 0.8. Fuel
specification: BS2869: Class A2.
Rating definitions
Baseload power: Power available for continuous full load operation.
No overload is permitted. Prime power: Power available for variable
load with
an average load factor not exceeding 80% of the prime power rating
in any 24 hour period. Overload of 10% permitted for 1 hour in
every 12 hours
operation. Standby (maximum): Power available at variable load in
the event of a main power network failure up to a maximum of 500
hours per
year. No overload is permitted.
